Microsens MS453490M Management Guide - Manual (Page 657)

C HAPTER 25 | General Security Measures
Web Authentication
– 657 –
web-auth system-
auth-control
This command globally enables web authentication for the switch. Use the
no form to restore the default.
S YNTAX
[no] web-auth system-auth-control
D EFAULT S ETTING
Disabled
C OMMAND M ODE
Global Configuration
C OMMAND U SAGE
Both web-auth system-auth-control for the switch and web-auth for an
interface must be enabled for the web authentication feature to be active.
E XAMPLE
Console(config)#web-auth system-auth-control
Console(config)#
web-auth This command enables web authentication for an interface. Use the no
form to restore the default.
S YNTAX
[no] web-auth
D EFAULT S ETTING
Disabled
C OMMAND M ODE
Interface Configuration
C OMMAND U SAGE
Both web-auth system-auth-control for the switch and web-auth for a
port must be enabled for the web authentication feature to be active.
E XAMPLE
Console(config-if)#web-auth
Console(config-if)#