Microsens MS453490M Management Guide - Manual (Page 891)

C HAPTER 38 | LLDP Commands
– 891 –
E XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp basic-tlv system-name
Console(config-if)#
lldp dot1-tlv proto-
ident
This command configures an LLDP-enabled port to advertise the supported
protocols. Use the no form to disable this feature.
S YNTAX
[no] lldp dot1-tlv proto-ident
D EFAULT S ETTING
Enabled
C OMMAND M ODE
Interface Configuration (Ethernet, Port Channel)
C OMMAND U SAGE
This option advertises the protocols that are accessible through this
interface.
E XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv proto-ident
Console(config-if)#
lldp dot1-tlv proto-
vid
This command configures an LLDP-enabled port to advertise port related
VLAN information. Use the no form to disable this feature.
S YNTAX
[no] lldp dot1-tlv proto-vid
D EFAULT S ETTING
Enabled
C OMMAND M ODE
Interface Configuration (Ethernet, Port Channel)
C OMMAND U SAGE
This option advertises the port-based and protocol-based VLANs configured
on this interface (see "Configuring VLAN Interfaces" on page 788 and
"Configuring Protocol-based VLANs" on page 802 ).