Microsens MS453490M Management Guide - Manual (Page 190)

C HAPTER 7 | Address Table Settings
Clearing the Dynamic Address Table
– 190 –
W EB I NTERFACE
To show the dynamic address table:
1. Click MAC Address, Dynamic.
2. Select Show Dynamic MAC from the Action list.
3. Select the Sort Key (MAC Address, VLAN, or Interface).
4. Enter the search parameters (MAC Address, VLAN, or Interface).
5. Click Query.
Figure 86: Displaying the Dynamic MAC Address Table
C LEARING THE D YNAMIC A DDRESS T ABLE
Use the MAC Address > Dynamic (Clear Dynamic MAC) page to remove any
learned entries from the forwarding database.
CLI R EFERENCES
◆ "clear mac-address-table dynamic" on page 755
P ARAMETERS
These parameters are displayed:
◆ Clear by – All entries can be cleared; or you can clear the entries for a
specific MAC address, all the entries in a VLAN, or all the entries
associated with a port or trunk.
W EB I NTERFACE
To clear the entries in the dynamic address table:
1.
Click MAC Address, Dynamic.