Microsens MS453490M Management Guide - Manual (Page 340)

C HAPTER 14 | Security Measures
IP Source Guard
– 340 –
new entry will replace the old one and the entry type will be
changed to static IP source guard binding.
■
Only unicast addresses are accepted for static bindings.
P ARAMETERS
These parameters are displayed:
◆ Port – The port to which a static entry is bound.
◆ VLAN – ID of a configured VLAN (Range: 1-4093)
◆ MAC Address – A valid unicast MAC address.
◆ IP Address – A valid unicast IP address, including classful types A, B
or C.
W EB I NTERFACE
To configure static bindings for IP Source Guard:
1. Click Security, IP Source Guard, Static Configuration.
2.
Select Add from the Action list.
3. Enter the required bindings for each port.
4. Click Apply
Figure 194: Configuring Static Bindings for IP Source Guard