Microsens MS453490M Management Guide - Manual (Page 811)

C HAPTER 34 | VLAN Commands
Configuring Voice VLANs
– 811 –
voice vlan aging This command sets the Voice VLAN ID time out. Use the no form to restore
the default.
S YNTAX
voice vlan aging minutes
no voice vlan
minutes - Specifies the port Voice VLAN membership time out.
(Range: 5-43200 minutes)
D EFAULT S ETTING
1440 minutes
C OMMAND M ODE
Global Configuration
C OMMAND U SAGE
The Voice VLAN aging time is the time after which a port is removed from
the Voice VLAN when VoIP traffic is no longer received on the port.
E XAMPLE
The following example configures the Voice VLAN aging time as 3000
minutes.
Console(config)#voice vlan aging 3000
Console(config)#
voice vlan mac-
address
This command specifies MAC address ranges to add to the OUI Telephony
list. Use the no form to remove an entry from the list.
S YNTAX
voice vlan mac-address mac-address mask mask-address
[description description]
no voice vlan mac-address mac-address mask mask-address
mac-address - Defines a MAC address OUI that identifies VoIP
devices in the network. (For example, 01-23-45-00-00-00)
mask-address - Identifies a range of MAC addresses. (Range: 80-
00-00-00-00-00 to FF-FF-FF-FF-FF-FF)
description - User-defined text that identifies the VoIP devices.
(Range: 1-32 characters)
D EFAULT S ETTING
None
C OMMAND M ODE
Global Configuration