Microsens MS453490M Management Guide - Manual (Page 904)

C HAPTER 39 | Domain Name Service Commands
– 904 –
Name Server List:
Console#
R ELATED C OMMANDS
ip domain-list (901)
ip name-server (905)
ip domain-lookup (902)
ip host This command creates a static entry in the DNS table that maps a host
name to an IPv4 address. Use the no form to remove an entry.
S YNTAX
[no] ip host name address
name - Name of an IPv4 host. (Range: 1-100 characters)
address - Corresponding IPv4 address.
D EFAULT S ETTING
No static entries
C OMMAND M ODE
Global Configuration
C OMMAND U SAGE
Use the no ip host command to clear static entries, or the clear host
command to clear dynamic entries.
E XAMPLE
This example maps an IPv4 address to a host name.
Console(config)#ip host rd5 192.168.1.55
Console(config)#end
Console#show hosts
No. Flag Type IP Address TTL Domain
---- ---- ------- -------------------- ----- ------------------------------
0 2 Address 192.168.1.55 rd5
Console#