Microsens MS453490M Management Guide - Manual (Page 153)

C HAPTER 5 | Interface Configuration
VLAN Trunking
– 153 –
P ARAMETERS
These parameters are displayed:
◆ Interface – Displays a list of ports or trunks.
◆ Port – Port Identifier. (Range: 9-10)
N OTE :
VLAN trunking can only be enabled on Gigabit ports.
◆ Trunk – Trunk Identifier. (Range: 1-5)
◆ VLAN Trunking Status – Enables VLAN trunking on the selected
interface.
W EB I NTERFACE
To enable VLAN trunking on a port or trunk:
1.
Click Interface, VLAN Trunking.
2.
Click Port or Trunk to specify the interface type.
3.
Enable VLAN trunking on any of the Gigibit ports or on a trunk
containing Gigabit ports.
4. Click Apply.
Figure 56: Configuring VLAN Trunking