Description – Microsens MS453490M Management Guide User Manual
Page 833
C
HAPTER
36
| Quality of Service Commands
– 833 –
◆
One or more class maps can be assigned to a policy map (
).
The policy map is then bound by a service policy to an interface
(
). A service policy defines packet classification, service
tagging, and bandwidth policing. Once a policy map has been bound to
an interface, no additional class maps may be added to the policy map,
nor any changes made to the assigned class maps with the
set commands.
E
XAMPLE
This example creates a class map call “rd-class,” and sets it to match
packets marked for DSCP service value 3:
Console(config)#class-map rd-class match-any
Console(config-cmap)#match ip dscp 3
Console(config-cmap)#
R
ELATED
C
OMMANDS
description
This command specifies the description of a class map or policy map.
S
YNTAX
description string
string - Description of the class map or policy map.
(Range: 1-64 characters)
C
OMMAND
M
ODE
Class Map Configuration
Policy Map Configuration
E
XAMPLE
Console(config)#class-map rd-class#1
Console(config-cmap)#description matches packets marked for DSCP service
value 3
Console(config-cmap)#