Main menu, Table 4: switch main menu – Microsens MS453490M Management Guide User Manual
Page 76
![background image](https://www.manualsdir.com/files/798575/content/doc076.png)
C
HAPTER
3
| Using the Web Interface
Navigating the Web Browser Interface
– 76 –
M
AIN
M
ENU
Using the onboard web agent, you can define system parameters, manage
and control the switch, and all its ports, or monitor network conditions. The
following table briefly describes the selections available from this program.
Table 4: Switch Main Menu
Menu
Description
Page
System
General
Provides basic system description, including contact information
Switch
Shows the number of ports, hardware version, power status, and
firmware version numbers
IP
Sets the IPv4 address for management access
Capability
Enables support for jumbo frames;
shows the bridge extension parameters
File
Copy
Allows the transfer and copying files
Set Startup
Sets the startup file
Show
Shows the files stored in flash memory; allows deletion of files
Automatic Operation Code Upgrade
Automatically upgrades operation code if a newer version is
found on the server
Time
Configure General
Manual
Manually sets the current time
SNTP
Configures SNTP polling interval
Configure Time Server
Configures a list of SNTP servers
Configure Time Zone
Sets the local time zone for the system clock
Console
Sets console port connection parameters
Telnet
Sets Telnet connection parameters
CPU Utilization
Displays information on CPU utilization
Memory Status
Shows memory utilization parameters
Reset
Restarts the switch immediately, at a specified time, after a
specified delay, or at a periodic interval
Interface
Port
General
Configure by Port List
Configures connection settings per port
Configure by Port Range
Configures connection settings for a range of ports
Show Information
Displays port connection status
Mirror
Add
Sets the source and target ports for mirroring
Show
Shows the configured mirror sessions
Statistics
Shows Interface, Etherlike, and RMON port statistics