Microsens MS453490M Management Guide - Manual (Page 937)

C HAPTER 41 | IP Interface Commands
IPv6 Interface
– 937 –
E XAMPLE
The following example shows the MTU cache for this device:
Console#show ipv6 mtu
MTU Since Destination Address
1400 00:04:21 5000:1::3
1280 00:04:50 FE80::203:A0FF:FED6:141D
Console#
show ipv6 traffic This command displays statistics about IPv6 traffic passing through this
switch.
C OMMAND M ODE
Normal Exec, Privileged Exec
E XAMPLE
The following example shows statistics for all IPv6 unicast and multicast
traffic, as well as ICMP, UDP and TCP statistics:
Console#show ipv6 traffic
IPv6 Statistics:
IPv6 recived
total received
header errors
too big errors
no routes
address errors
unknown protocols
truncated packets
discards
delivers
reassembly request datarams
reassembled succeeded
reassembled failed
IPv6 sent
forwards datagrams
15 requests
discards
no routes
generated fragments
fragment succeeded
fragment failed
Table 141: show ipv6 mtu - display description *
* No information is displayed if an IPv6 address has not been assigned to the switch.
Field Description
MTU Adjusted MTU contained in the ICMP packet-too-big message returned from
this destination, and now used for all traffic sent along this path.
Since Time since an ICMP packet-too-big message was received from this
destination.
Destination
Address
Address which sent an ICMP packet-too-big message.