Microsens MS453490M Management Guide - Manual (Page 600)

C HAPTER 24 | Authentication Commands
AAA
– 600 –
aaa group server Use this command to name a group of security server hosts. To remove a
server group from the configuration list, enter the no form of this
command.
S YNTAX
[no] aaa group server {radius | tacacs+} group-name
radius - Defines a RADIUS server group.
tacacs+ - Defines a TACACS+ server group.
group-name - A text string that names a security server group.
(Range: 1-7 characters)
D EFAULT S ETTING
None
C OMMAND M ODE
Global Configuration
E XAMPLE
Console(config)#aaa group server radius tps
Console(config-sg-radius)#
server This command adds a security server to an AAA server group. Use the no
form to remove the associated server from the group.
S YNTAX
[no] server {index | ip-address}
index - Specifies the server index.
(Range: RADIUS 1-5, TACACS+ 1)
ip-address - Specifies the host IP address of a server.
D EFAULT S ETTING
None
C OMMAND M ODE
Server Group Configuration
C OMMAND U SAGE
◆ When specifying the index for a RADIUS server, that server index must
already be defined by the radius-server host command.
◆ When specifying the index for a TACACS+ server, that server index
must already be defined by the tacacs-server host command.