Microsens MS453490M Management Guide - Manual (Page 123)

C HAPTER 5 | Interface Configuration
Port Configuration
– 123 –
W EB I NTERFACE
To configure a local mirror session:
1. Click Interface, Port, Mirror.
2. Select Add from the Action List.
3. Specify the source port.
4. Specify the monitor port.
5. Specify the traffic type to be mirrored.
6. Click Apply.
Figure 28: Configuring Local Port Mirroring
To display the configured mirror sessions:
1.
Click Interface, Port, Mirror.
2.
Select Show from the Action List.
Figure 29: Displaying Local Port Mirror Sessions