Microsens MS453490M Management Guide User Manual
Page 84
C
HAPTER
3
| Using the Web Interface
Navigating the Web Browser Interface
– 84 –
Show Local Device Information
General
Displays general information about the local device
Port/Trunk
Displays information about each interface
Show Remote Device Information
Port/Trunk
Displays information about a remote device connected to a port on
this switch
Port/Trunk Details
Displays detailed information about a remote device connected to
this switch
Show Device Statistics
General
Displays statistics for all connected remote devices
Port/Trunk
Displays statistics for remote devices on a selected port or trunk
SNMP
Simple Network Management Protocol
Configure Global
Enables SNMP agent status, and sets related trap functions
Configure Engine
Set Engine ID
Sets the SNMP v3 engine ID on this switch
Add Remote Engine
Sets the SNMP v3 engine ID for a remote device
Show Remote Engine
Shows configured engine ID for remote devices
Configure View
Add View
Adds an SNMP v3 view of the OID MIB
Show View
Shows configured SNMP v3 views
Add OID Subtree
Specifies a part of the subtree for the selected view
Show OID Subtree
Shows the subtrees assigned to each view
Configure Group
Add
Adds a group with access policies for assigned users
Show
Shows configured groups and access policies
Configure User
Add Community
Configures community strings and access mode
Show Community
Shows community strings and access mode
Add SNMPv3 Local User
Configures SNMPv3 users on this switch
Show SNMPv3 Local User
Shows SNMPv3 users configured on this switch
Change SNMPv3 Local User Group
Assign a local user to a new group
Add SNMPv3 Remote User
Configures SNMPv3 users from a remote device
Show SNMPv3 Remote User
Shows SNMPv3 users set from a remote device
Configure Trap
Add
Configures trap managers to receive messages on key events that
occur this switch
Show
Shows configured trap managers
Table 4: Switch Main Menu (Continued)
Menu
Description
Page