Microsens MS453490M Management Guide - Manual (Page 501)

C HAPTER 21 | System Management Commands
Banner Information
– 501 –
banner configure
manager-info
This command is used to configure the manager contact information
displayed in the banner. Use the no form to restore the default setting.
S YNTAX
banner configure manager-info
name mgr1-name phone-number mgr1-number
[name2 mgr2-name phone-number mgr2-number |
name3 mgr3-name phone-number mgr3-number]
no banner configure manager-info [name1 | name2 | name3]
mgr1-name - The name of the first manager.
mgr1-number - The phone number of the first manager.
mgr2-name - The name of the second manager.
mgr2-number - The phone number of the second manager.
mgr3-name - The name of the third manager.
mgr3-number - The phone number of the third manager.
Maximum length of each parameter: 32 characters
D EFAULT S ETTING
None
C OMMAND M ODE
Global Configuration
C OMMAND U SAGE
Input strings cannot contain spaces. The banner configure manager-
info command interprets spaces as data input boundaries. The use of
underscores ( _ ) or other unobtrusive non-letter characters is suggested
for situations where white space is necessary for clarity.
E XAMPLE
Console(config)#banner configure manager-info name Albert_Einstein phone-
number 123-555-1212 name2 Lamar phone-number 123-555-1219
Console(config)#
banner configure
mux
This command is used to configure the mux information displayed in the
banner. Use the no form to restore the default setting.
S YNTAX
banner configure mux muxinfo
no banner configure mux
muxinfo - The circuit and PVC to which the switch is connected.
(Maximum length: 32 characters)