Microsens MS453490M Management Guide - Manual (Page 470)

C HAPTER 18 | Multicast Filtering
Multicast VLAN Registration
– 470 –
D ISPLAYING MVR
R ECEIVER G ROUPS
Use the Multicast > MVR (Show Member) page to display the interfaces
assigned to the MVR receiver groups.
CLI R EFERENCES
◆ "show mvr" on page 880
P ARAMETERS
These parameters are displayed:
◆ Group IP Address – Multicast groups assigned to the MVR VLAN.
◆ Source IP Address – Indicates the source address of the multicast
service, or displays an asterisk if the group address has been statically
assigned.
◆ VLAN – Indicates the MVR VLAN receiving the multicast service.
◆ Forwarding Port – Shows the interfaces with subscribers for multicast
services provided through the MVR VLAN. Also shows the VLAN through
which the service is received. Note that this may be different from the
MVR VLAN if the group address has been statically assigned.
W EB I NTERFACE
To display the interfaces assigned to the MVR receiver groups:
1.
Click Multicast, MVR.
2.
Select Show Member from the Step list.
Figure 290: Displaying MVR Receiver Groups