Microsens MS453490M Management Guide - Manual (Page 546)

C HAPTER 21 | System Management Commands
Time Range
– 546 –
absolute This command sets the time range for the execution of a command. Use
the no form to remove a previously specified time.
S YNTAX
absolute start hour minute day month year
[end hour minutes day month year]
absolute end hour minutes day month year
no absolute
hour - Hour in 24-hour format. (Range: 0-23)
minute - Minute. (Range: 0-59)
day - Day of month. (Range: 1-31)
month - january | february | march | april | may | june | july |
august | september | october | november | december
year - Year (4-digit). (Range: 2009-2109)
D EFAULT S ETTING
None
C OMMAND M ODE
Time Range Configuration
C OMMAND U SAGE
If a time range is already configured, you must use the no form of this
command to remove the current entry prior to configuring a new time
range.
E XAMPLE
This example configures the time for the single occurrence of an event.
Console(config)#time-range r&d
Console(config-time-range)#absolute start 1 1 1 april 2009 end 2 1 1 april
2009
Console(config-time-range)#
periodic This command sets the time range for the periodic execution of a
command. Use the no form to remove a previously specified time range.
S YNTAX
[no] periodic {daily | friday | monday | saturday | sunday |
thursday | tuesday | wednesday | weekdays | weekend}
hour minute to {daily | friday | monday | saturday | sunday |
thursday | tuesday | wednesday | weekdays | weekend |
hour minute}
daily - Daily
friday - Friday