Revision 767, Revision – Microsens MS453490M Management Guide User Manual
Page 767
C
HAPTER
33
| Spanning Tree Commands
– 767 –
C
OMMAND
M
ODE
MST Configuration
C
OMMAND
U
SAGE
The MST region name and revision number (
) are used to
designate a unique MST region. A bridge (i.e., spanning-tree compliant
device such as this switch) can only belong to one MST region. And all
bridges in the same region must be configured with the same MST
instances.
E
XAMPLE
Console(config-mstp)#name R&D
Console(config-mstp)#
R
ELATED
C
OMMANDS
revision
This command configures the revision number for this multiple spanning
tree configuration of this switch. Use the no form to restore the default.
S
YNTAX
revision number
number - Revision number of the spanning tree. (Range: 0-65535)
D
EFAULT
S
ETTING
0
C
OMMAND
M
ODE
MST Configuration
C
OMMAND
U
SAGE
The MST region name (
) and revision number are used to
designate a unique MST region. A bridge (i.e., spanning-tree compliant
device such as this switch) can only belong to one MST region. And all
bridges in the same region must be configured with the same MST
instances.
E
XAMPLE
Console(config-mstp)#revision 1
Console(config-mstp)#
R
ELATED
C
OMMANDS