Microsens MS453490M Management Guide - Manual (Page 519)

C HAPTER 21 | System Management Commands
File Management
– 519 –
◆ When specifying a TFTP server, the following syntax must be used,
where filedir indicates the path to the directory containing the new
image:
tftp://192.168.0.1[/filedir]/
◆ When specifying an FTP server, the following syntax must be used,
where filedir indicates the path to the directory containing the new
image:
ftp://[username[:password@]]192.168.0.1[/filedir]/
If the user name is omitted, “Anonymous” will be used for the
connection. If the password is omitted a null string (“”) will be used for
the connection.
E XAMPLE
This shows how to specify a TFTP server where new code is stored.
Console(config)#upgrade opcode path tftp://192.168.0.1/sm24/
Console(config)#
This shows how to specify an FTP server where new code is stored.
Console(config)#upgrade opcode path ftp://admin:[email protected]/sm24/
Console(config)#