Displaying vlan information, Show vlan, Displaying vlan – Microsens MS453490M Management Guide User Manual
Page 795: Information, Show vlan (795), Vlan i
![background image](https://www.manualsdir.com/files/798575/content/doc795.png)
C
HAPTER
34
| VLAN Commands
Displaying VLAN Information
– 795 –
Console(config)#interface ethernet 1/9
Console(config-if)#vlan-trunking
Console(config-if)#interface ethernet 1/10
Console(config-if)#vlan-trunking
Console(config-if)#
D
ISPLAYING
VLAN I
NFORMATION
This section describes commands used to display VLAN information.
show vlan
This command shows VLAN information.
S
YNTAX
show vlan [id vlan-id | name vlan-name]
id - Keyword to be followed by the VLAN ID.
vlan-id - ID of the configured VLAN. (Range: 1-4093, no leading
zeroes)
name - Keyword to be followed by the VLAN name.
vlan-name - ASCII string from 1 to 32 characters.
D
EFAULT
S
ETTING
Shows all VLANs.
C
OMMAND
M
ODE
Normal Exec, Privileged Exec
E
XAMPLE
The following example shows how to display information for VLAN 1:
Console#show vlan id 1
VLAN ID: 1
Type: Static
Name: DefaultVlan
Status: Active
Ports/Port Channels : Eth1/ 1(S) Eth1/ 2(S) Eth1/ 3(S) Eth1/ 4(S) Eth1/ 5(S)
Table 107: Commands for Displaying VLAN Information
Command
Function
Mode
vlan
Displays status for the specified VLAN interface
NE, PE
Displays the administrative and operational status of
an interface
NE, PE
Shows VLAN information
NE, PE