Automatic traffic control commands, 31 a, Utomatic – Microsens MS453490M Management Guide User Manual
Page 739: Raffic, Ontrol, Ommands, Table 97: atc commands
– 739 –
31
A
UTOMATIC
T
RAFFIC
C
ONTROL
C
OMMANDS
Automatic Traffic Control (ATC) configures bounding thresholds for
broadcast and multicast storms which can be used to trigger configured
rate limits or to shut down a port.
Table 97: ATC Commands
Command
Function
Mode
Threshold Commands
Sets the time at which to apply the control
response after ingress traffic has exceeded the
upper threshold
GC
Sets the time at which to release the control
response after ingress traffic has fallen beneath
the lower threshold
GC
Enables automatic traffic control for broadcast
or multicast storms
IC (Port)
Sets the control action to limit ingress traffic or
shut down the offending port
IC (Port)
Sets the lower threshold for ingress traffic
beneath which a cleared storm control trap is
sent
IC (Port)
Sets the upper threshold for ingress traffic
beyond which a storm control response is
triggered after the apply timer expires
IC (Port)
Manually releases a control response
IC (Port)
Automatically releases a control response
PE
SNMP Trap Commands
Sends a trap when broadcast traffic falls
beneath the lower threshold after a storm
control response has been triggered
IC (Port)
Sends a trap when broadcast traffic exceeds the
upper threshold for automatic storm control
IC (Port)
Sends a trap when broadcast traffic exceeds the
upper threshold for automatic storm control and
the apply timer expires
IC (Port)
Sends a trap when broadcast traffic falls
beneath the lower threshold after a storm
control response has been triggered and the
release timer expires
IC (Port)
Sends a trap when multicast traffic falls beneath
the lower threshold after a storm control
response has been triggered
IC (Port)
Sends a trap when multicast traffic exceeds the
upper threshold for automatic storm control
IC (Port)