Altera Video and Image Processing Suite - Manual (Page 260)

Command Arguments Function
trace_get_monitor_info
Returns a serialized array containing
information about the specified monitor. You
can use the array set command to convert this
into a TCL array.
trace_read_monitor Reads a 32-bit value from configuration space
within the specified monitor.
trace_write_monitor Writes a 32-bit value from configuration
space within the specified monitor.
trace_get_max_db_size
Gets the maximum (in memory) trace
database size set for this trace system. If the
trace database size exceeds this value, then
the oldest values are discarded.
trace_set_max_db_size
Returns the current maximum trace database
size. Trace database sizes are approximate but
can be used to prevent a high data rate
monitor from using up all available memory.
trace_start
fifo
Starts capturing with the specified trace
system in real time (FIFO) mode.
trace_stop
Stops capturing with the specified trace
system.
trace_get_status
Returns the current status (idle or running)
of the trace system. In future, new status
values may be added.
trace_get_db_size
Returns the approximate size of the database
for the specified trace system.
trace_save
Saves the trace database to disk.
20-8 TCL Shell Commands
UG-VIPSUITE
2015.05.04
Altera Corporation Trace System IP Core
Send Feedback