EXFO IQS-8100 Series Transport Blazer for IQS-600 - Manual (Page 61)

Introducing and Using the Graphical User Interface
SONET/SDH Application 47
Usual Tab Elements
Alarm/Error Measurements
Note: Alarms/Errors are only monitored once the test is started.
³
Seconds: Gives the total number of the seconds in which one or more
alarm/error occurred.
³
Count: Gives the number of occurrences of a specific error. The count
is displayed using integer value; exponential value (1.00000E10) is used
when the count is bigger than the field display capacity.
³
Rate: Calculates and displays the error rate. The rate is expressed using
the exponential format with two decimal digits (example: 1.23E-04).
³
Percentage values are expressed using one decimal digit.
(example: 9.9%).
³
Alphanumeric values display the extended ASCII character set
including the ITU T.50 Characters on page 57. For Trace Messages using
64-bytes format, the last 2 bytes, Carriage Return and Line Feed, will be
displayed within brackets ( and ).
Arrow Buttons
Button Description
Top arrow: Moves to the top of the list.
Page up arrow: Moves one page up.
Up arrow: Moves one row up.
Down arrow: Moves one row down.
Page down arrow: Moves one page down.
End arrow: Moves to the end of the list.