beautypg.com

Alarm generation – EXFO IQS-8100 Series Transport Blazer for IQS-600 User Manual

Page 332

background image

SDH Tabs

318

IQS-8100 Series Transport Blazer

Multiplex Section TX (SDH)

Alarm Generation

Allows Continuous or Burst alarm generation methods.

³

Type

MS-AIS (Multiplex Section - Alarm Indication Signal): Generates an
SDH signal that contains a valid Regenerator Section Overthead
(RSOH) and an all-ones pattern on the SPE.

MS-RDI (Multiplex Section - Remote Defect Indication): Generates a
“110” pattern for the bits 6, 7 and 8 of the K2 byte.

The default setting is MS-AIS.

For Continuous method:

³

On/Off button: The On/Off button is used to activate/deactivate the
selected alarm. This setting is disabled (Off) by default.