EXFO IQS-8100 Series Transport Blazer for IQS-600 - Manual (Page 492)

Next-Generation Tabs
478 IQS-8100 Series Transport Blazer
LCAS - Source
³
MST
³
MST: Indicates the current MST value that is applied to the state
machine. Possible values are OK (0) and Fail (1).
³
Overwrite Enable: Allows overwriting the member status. The
status of each member having the Overwrite Enable checked can
be overwritten. Click on a specific member drop list and select the
new status. Possible statuses are OK and Fail. The status(es)
changed will only take effect when the Apply Overwrite Value(s)
button is pressed.
³
Enable All: Allows enabling the MST overwrite for all members.
³
Apply Overwrite Value(s): Allows applying the new overwrite
value(s).
³
Received: Indicates the member status received at the source.
RS-Ack (Re-Sequence Acknowledge)
³
Status: Indicates the status of the RS-Ack. Possible statuses are
Received and Pending.
³
Received Value: Toggle every time a RS-Ack is received. The value
toggle either from 0 to 1 or 1 to 0.
³
Received Count: Indicates the number of RS-Ack received.
³
Timeout Count: Indicates the RS-Ack timeout count based on the
configuration of the RS-Ack Timeout on page 480.
³
Unexpected Count: Indicates the number of unexpected RS-Ack.
³
Manual Toggle Count: Indicates the number of manual toggle.
³
Manual Control: Allows blocking the RS-Ack received from reaching
the state machine.
³
Toggle RS-Ack button: Allows to forced a received RS-Ack.