beautypg.com

Aution – EXFO IQS-8100 Series Transport Blazer for IQS-600 User Manual

Page 35

background image

Physical Interfaces and LEDs

SONET/SDH Application

21

OTN/OC-N/STM-N Interface Connections

Carefully connect optical fibre cables to the SFP/XFP’s (IQS-8115, IQS-8120,
IQS-8120NG, IQS-8120NGE, IQS-8130, IQS-8130NG, and IQS-8130NGE) or
transponder (IQS-8140) IN and OUT ports. To ensure good signal quality,
make sure that the optical fibre connector is fully inserted into the optical
connector port.

³

LASER red LED: The LASER LED is on when the IQS-8100 Series is
emitting an optical laser signal.

³

RX green LED: The RX LED is on when the IQS-8100 Series is receiving
an optical laser signal.

C

AUTION

To prevent exceeding the maximum input power level please use an
attenuator when a loopback configuration is used.