beautypg.com

Vcat rx - overview, Group size, Lcas configuration – EXFO IQS-8100 Series Transport Blazer for IQS-600 User Manual

Page 477: Sq controls

background image

Next-Generation Tabs

SONET/SDH Application

463

VCAT RX - Overview

VCAT RX - Overview

Press TEST, VCAT and Overview (under VCAT RX).

Group Size

Group Size indicates the type and size of the VCG members as well as the
bandwidth used by the VCG group. For example STS-1-21v =
145.152 Mbps
indicates STS-1 as the VCG type, 21v for the size, and
145.152 Mbps for the bandwidth of the VCG group.

LCAS Configuration

Allows enabling LCAS configuration. See LCAS - Source on page 468 and
LCAS Sink on page 481 for more information.

Note: Enable LCAS from TX and RX tabs are coupled.

SQ Controls

³

Apply ExSQ button: Validates and applies the ExSQ number for each
member. Available only when at least one SQ number has been
changed. Not available when Enable LCAS is enabled.

³

Resequence ExSQ button: Assigns SQ number sequentially following
the timeslot order. Not available when Enable LCAS is enabled.

³

Copy SQ to ExSQ button: Replaces the ExSQ with the SQ number. Not
available when Enable LCAS is enabled.