EXFO IQS-8100 Series Transport Blazer for IQS-600 - Manual (Page 56)

Introducing and Using the Graphical User Interface
42 IQS-8100 Series Transport Blazer
Test Report Generation
Test Report Generation
Press Report from the Global Test Status and Controls to generate a report
for the current test. The report contains all the information about the test
including the job information, system information, interface setup, test
summary, test configuration, results, etc.
Note: The Report button is not available while the test is running or the
SmartMode alarm scan is running.
Note: Nothing prevents the configuration and alarm/error injection setup while
the test has been stopped; thus, the report should be saved before changing
any test parameters to avoid discrepancy between the configuration and
results.
Information
³
Job Information: These parameters are used to identify the
source of the report and are not mandatory. Enter the following job
information if required: Job ID, Contractor, Customer, Operator
Name, and Comment. Up to 256 characters are allowed for each
parameter.