beautypg.com

Fdl prm tx, Performance report messages – EXFO IQS-8100 Series Transport Blazer for IQS-600 User Manual

Page 302

background image

DSn Tabs

288

IQS-8100 Series Transport Blazer

FDL PRM TX

FDL PRM TX

Press TEST, DSn-PDH, and PRM (under DSn-PDH TX).

Note: FDL PRM TX is only available for DS1 interface with ESF framing when

Enable FDL from FDL TX/RX is enabled. For Dual RX test, FDL is only
available for the primary DS1 TX/RX port.

Performance Report Messages

³

Circuit allows the selection of the circuit type. Choices are CI to
Network
and Network to CI. The default setting is CI to Network.

³

ANSI T1-403 allows the generation of a compliant ANSI T1.403 PRM
Message.

³

Manual

Send allows to manually send the selected PRM Message(s).

³

Continuous

On/Off allows to generate the selected PRM Message(s) continuously.