beautypg.com

Clock synchronization – EXFO IQS-8100 Series Transport Blazer for IQS-600 User Manual

Page 534

background image

System Tab

520

IQS-8100 Series Transport Blazer

Clock Synchronization

Clock Synchronization

Press System and Clock Synchronization.

Note: TX and RX clock configuration is not available when the test mode is set to

Dual RX. Refer to Test Configuration on page 126 for more information.

TX

Note: TX clock configuration is only possible when the RX clock is set to None.

Configuration: Allows the configuration of the clock that will be
generated. First select the Interface Type then, the other parameters will
become accessible for configuration.

³

Interface Type: Allows the selection of the clock interface signal
(DS1/E1/2M) that will be generated. Choices are: None, DS1, E1, and
2 MHz. The default setting is None.