beautypg.com

EXFO IQS-8100 Series Transport Blazer for IQS-600 User Manual

Page 141

background image

Summary Tabs

SONET/SDH Application

127

Test Summary

³

NI/CSU Emulation: Indicates that the IQS-8105/15/20/30 unit is
emulating the loopback capabilities of a network device in order to
respond to an incoming loopback code of a DS1 signal. It can also
be used to manually configure a payload or DS1 loopback adapted
to the frame format.

³

Multi-Channel SDT: Indicates that the RX signal is looped to the TX
port at the highest termination layer and the RX signal is monitored
at each layer defined in the test case.

³

Coupled:

³

Indicates that both TX and RX parameters are coupled when the
Coupled check box is selected.

³

Indicates that TX and RX parameters are independent (decoupled)
when the Coupled check box is cleared.