EXFO IQS-8100 Series Transport Blazer for IQS-600 - Manual (Page 32)

Physical Interfaces and LEDs
18 IQS-8100 Series Transport Blazer
Port Availability on IQS-8100 Series Module
Port Availability on IQS-8100 Series Module
The following table shows the list of available ports as well as a description
and signals supported for each module. For Ethernet and Fibre Channel
ports, refer to the “Ethernet and Fibre Channel Application” user guide.
Port labelled Description Supported signal(s) Module
155M-2.5G Optical IN/OUT port
small form factor
pluggable (SFP)
OC-3/STM-1, OC-12/STM-4,
OC-48/STM-16
IQS-8115
155M-2.7G Optical IN/OUT port
small form factor
pluggable (SFP)
OC-3/STM-1, OC-12/STM-4,
OC-48/STM-16, OTU1
IQS-8120
IQS-8120NG
IQS-8130
IQS-8130NG
100M-4.25G Optical IN/OUT port
small form factor
pluggable (SFP)
OC-3/STM-1, OC-12/STM-4,
OC-48/STM-16, OTU1, Ethernet
100Mbps, Ethernet 1000Mbps, FC
1x, FC 2x, FC 4x
IQS-8120NGE
IQS-8130NGE
10G/10.7G Optical IN/OUT port
10G small form factor
pluggable (XFP)
OC-192/STM-64, OTU2, OTU2e,
OTU1e, OTU1f, OTU2f,
Ethernet 10Gig (IQS-8130NGE), FC
10x (IQS-8130NGE)
IQS-8130
IQS-8130NG
IQS-8130NGE
40G/43G Optical IN/OUT OC-768/STM-256, OTU3 IQS-8140
2M/8M/34M/
45M/52M/
140M/155M, or
2M-155M
Electrical IN/OUT port
BNC
E1/2M, E2/8M, E3/34M, DS3/45M,
STS-1e/STM-0e/52M, E4/140M,
STS-3e/STM-1e/155M
IQS-8105/15/2
0/30
1.5M/2M Electrical IN/OUT port
Bantam
DS1/1.5M, E1/2M IQS-8100
Series
1.5M/2M Electrical port RJ-48C DS1/1.5M, E1/2M IQS-8100
Series
AUX Electrical port BNC DS1/1.5M/E1/2M/2 MHz signal for
external clock synchronization, or
DS1/DS3 signal for Dual RX test.
IQS-8100
Series