EXFO IQS-8100 Series Transport Blazer for IQS-600 - Manual (Page 360)

SDH Tabs
346 IQS-8100 Series Transport Blazer
HOP OH TX/RX (SDH)
Path Signal Label (C2)
The C2 byte is allocated to indicate the content of the VC, including the
status of the mapped payloads.
For HOP OH RX tab only:
³
Expected Path Signal Label: Allows selecting the expected Path Signal
Label.
³
Enable HP-PLM/HP-UNEQ (High Order Path - Payload Label Mismatch
/ Unequipped): Enables the Payload Label Mismatch and Unequipped
monitoring..
C2
(Hex.)
Description
C2
(Hex.)
Description
00
a
a. These values cannot be selected as Expected Path Signal Label.
Unequipped or
supervisory-unequipped
17 Reserved (SDL self-synch scrambler)
01 Reserved (Equipped -
Non-Specific)
18 Mapping of HDLC/LAPS
02 TUG Structure 19 Reserved (SDL set-reset scrambler)
03 Locked TU-n 1A Mapping of 10 Gbps Ethernet (IEEE 802.3)
04 Asynchronous Mapping of
34M/45M in C-3
1B GFP
05 Experimental Mapping 1C Mapping 10 Gbps FC
12 Asynchronous Mapping of
140M in C-4
20 Asynchronous Mapping of ODUk
13 ATM Mapping CF Reserved (obsolete HDLC/PPP framed)
14 MAN DQDB FE Test Signal, ITU-T 0.181 specific mapping
15 FDDI [3]-[11] Mapping FF
a
VC-AIS (TCM)
16 Mapping of HDLC/PPP