beautypg.com

Alarm generation – EXFO IQS-8100 Series Transport Blazer for IQS-600 User Manual

Page 240

background image

SONET Tabs

226

IQS-8100 Series Transport Blazer

Line TX (SONET)

Alarm Generation

Allows Continuous or Burst alarm generation methods.

³

Type

AIS-L (Alarm Indication Signal - Line): Generates a SONET signal that
contains a valid Section Overthead (SOH) and an all-ones pattern on
the SPE.

RDI-L (Remote Defect Indication - Line): Generates a “110” pattern for
the bits 6, 7 and 8 of the K2 byte.

The default setting is AIS-L

For Continuous method:

³

On/Off button: The On/Off button is used to activate/deactivate the
selected alarm. This setting is disabled (Off) by default.