beautypg.com

E3/34m tx, Configuration, Alarm generation – EXFO IQS-8100 Series Transport Blazer for IQS-600 User Manual

Page 399

background image

PDH Tabs

SONET/SDH Application

385

E3/34M TX

E3/34M TX

Press TEST, DSn-PDH, and E3 (under DSn-PDH TX).

Configuration

Framing: Select the framing that will be used for transmission. Choices are
Unframed and Framed. The default setting is Framed.

Alarm Generation

Type: Select the type of alarm to be generated. Choices are LOF, RAI, and
AIS. The default setting is AIS.

Note: Only AIS is available when the framing is set to Unframed.

On/Off button: Press On/Off to enable/disable the alarm generation.