EXFO IQS-8100 Series Transport Blazer for IQS-600 - Manual (Page 585)

Specifications
SONET/SDH Application 571
Optical Interfaces
Optical Interface for IQS-8140
NOTE
a. In order not to exceed the maximum receiver power level before damage, an attenuator must be used.
OC-768/STM-256/OTU3
Line coding NRZ NRZ-DPSK
Level Tx (dBm) 0 to 3 4 to 7.5
Rx operating range (dBm) –5 to 3 3 to 8
Transmit bit rate 39.81312 Gbit/s ± 4.6 ppm 39.81312 Gbit/s ± 4.6 ppm
43.01841 Gbit/s ± 4.6 ppm (OTU3) 43.01841 Gbit/s ± 4.6 ppm (OTU3)
Receive bit rate 39.81312 Gbit/s ± 100 ppm 39.81312 Gbit/s ± 100 ppm
43.01841 Gbit/s ± 100 ppm (OTU3) 43.01841 Gbit/s ± 100 ppm (OTU3)
Operational wavelength range (nm) 1530 to 1565 1528.77 to 1563.86
Frequency offset generation 39.81312 Gbit/s ± 50 ppm 39.81312 Gbit/s ± 50 ppm
43.01841 Gbit/s ± 50 ppm 43.01841 Gbit/s ± 50 ppm
Measurement accuracy (uncertainty)
Frequency (ppm) ±4.6 ±4.6
Optical power (dB) ±2 ±1.3 (–6 to 5)
Rx overload (dBm) 3 8
Rx damage level a (dBm) 6 10
Jitter compliance GR-253 (SONET) GR-253 (SONET)
G.958 (SDH) G.958 (SDH)
G.8251 (OTN) G.8251 (OTN)
Line coding compliance G.693 VSR 2000 compliant NRZ-DPSK
Connector SC, FC, LC, ST SC, FC, LC, ST