EXFO IQS-8100 Series Transport Blazer for IQS-600 - Manual (Page 518)

Common Tabs
504 IQS-8100 Series Transport Blazer
Performance Monitoring (PM)
Performance Monitoring (PM)
Note: This tab is not available with VCAT, LCAS and GFP.
The Performance Monitoring tab gives error performance events and
parameters for the DSn/PDH or SONET/SDH circuit under test.
For SONET/SDH Section/RS: Press TEST, Sec-Line, and Section/RS PM
(under Sec-Line/RS-MS RX).
For SONET/SDH Line/MS: Press TEST, Sec-Line, and Line/MS PM (under
Sec-Line/RS-MS RX).
For SONET/SDH HOP: Press TEST, HOP, and PM (under HOP RX).
For SONET/SDH LOP: Press TEST, LOP, and PM (under LOP RX).
For DSn-PDH: Press TEST, DSn-PDH, and DS1/DS3/E1/E2/E3/E4 PM (under
DSn-PDH RX).
For Pattern: Press TEST, Pattern, and PM (under Pattern RX).