beautypg.com

Lcas source - sq/ctrl control – EXFO IQS-8100 Series Transport Blazer for IQS-600 User Manual

Page 489

background image

Next-Generation Tabs

SONET/SDH Application

475

LCAS - Source

LCAS Source - SQ/CTRL Control

Press TEST, LCAS and SQ/CTRL Control (under LCAS Source).

Note: Not available in Through mode.

³

Member indicates the timeslot number.

³

SQ

SQ (Sequence Indicator): Indicates the member sequence indicator.
The SQ for members in IDLE state will be automatically set to 63 for
LOP or 255 for HOP.

Overwrite Enable: Allows overwriting the SQ number. The SQ number
of each member having the Overwrite Enable checked can be
overwritten. Click on a specific member’s SQ number and enter the
new number. Possible values are from 0 to 63 for LOP and from 0 to
255 for HOP. The number(s) changed will only take effect when the
Apply Overwrite Value(s) button is pressed.

Generated: The SQ value generated by the state machine.

Enable All: Allows enabling the SQ overwrite for all members.