EXFO IQS-8100 Series Transport Blazer for IQS-600 - Manual (Page 542)

System Tab
528 IQS-8100 Series Transport Blazer
Application Preferences
Application Preferences
Press System, and Preferences.
Note: The application preferences are saved per slot on the IQS-600 meaning that
the configuration will not follow the module when changing the module
from one slot to another. However, a configuration on a specific slot will
remain when replacing a module by another module of the same model.
Time Options
³
Time Format: Sets the absolute time format of the GUI (current time
and timers). The default setting is ISO. Choices are:
ISO displays the time and timers with the yyyy-mm-dd hh:mm:ss
format.
USA displays the time and timers with the mm/dd/yy hh:mm:ss AM/PM
format.
³
Time Zone: Allows the selection of the time zone source. The default
setting is Local.
UTC/GMT displays the time base on the UTC time zone.
Local displays the time from the IQS-600 unit or from the PC when
using Visual Guardian Lite.