EXFO IQS-8100 Series Transport Blazer for IQS-600 - Manual (Page 188)

OTN Tabs
174 IQS-8100 Series Transport Blazer
ODU TCM TTI TX
TCMi TTI Trace
Message
³
SAPI allows editing the Source Access Point Identifier to be generated
(TTI bytes 1 to 15). A maximum of 15 characters are allowed. The
default setting is EXFO TCMi SAPI. The TTI byte 0 is set to NULL (all
0’s).
³
DAPI allows editing the Destination Access Point Identifier to be
generated (TTI bytes 17 to 31). A maximum of 15 characters are
allowed. The default setting is EXFO TCMi DAPI. The TTI byte 16 is set
to NULL (all 0’s).
³
Operator Specific allows editing the Operator Specific to be
generated (TTI bytes 32 to 63). A maximum of 32 characters are
allowed. The default setting is EXFO TCMi OPERATOR SPECIFIC.
Note: “i” is the level (1 to 6) of the selected TCM.