EXFO IQS-8100 Series Transport Blazer for IQS-600 - Manual (Page 209)

OTN Tabs
SONET/SDH Application 195
ODU TTI/FTFL RX
Expected Message
³
SAPI allows editing the expected Source Access point Identifier (TTI
bytes 1 to 15). Available when Enable TIM SAPI is enabled. The default
setting is EXFO ODU SAPI. The TTI byte 0 is set to NULL (all zeros).
³
DAPI allows editing the expected Destination Access point Identifier
(TTI bytes 17 to 31). Available when Enable TIM DAPI is enabled. The
default setting is EXFO ODU DAPI. The TTI byte 16 is set to NULL
(all 0’s).
³
Enable TIM
SAPI allows the edition of the expected Source Access Point Identifier
when the SAPI check box is selected. Enables also the ODU-TIM alarm
monitoring. The SAPI check box is cleared by default.
DAPI allows the edition of the expected Destination Access Point
Identifier when the DAPI check box is selected. Enables also the
ODU-TIM alarm monitoring. The DAPI check box is cleared by default.