EXFO IQS-8100 Series Transport Blazer for IQS-600 - Manual (Page 419)

SONET/SDH Application 405
16 BERT Tabs
This section describes the BERT tabs.
Pattern TX
Note: This tab is not used when Through mode is enabled.
Press TEST, and BERT.
Configuration
³
Overwrite: Available with SONET/SDH Intrusive through mode down
to HOP mapping level only; not supported with DSn/PDH, LOP, and
Next Generation mapping levels. Not available on IQS-8105/IQS-8115.
The Overwrite check box when selected, allows the termination of the
RX pattern and the insertion (TX) of the selected PRBS test pattern.
Tab Page
Pattern TX 405
Pattern RX 409
Performance Monitoring (PM)
a
a. This tab is described in the Common Tabs section.
504
Client Offset TX
a
513
Client Offset RX
a
515