beautypg.com

Lop oh tx/rx (sonet), Path overhead – EXFO IQS-8100 Series Transport Blazer for IQS-600 User Manual

Page 280

background image

SONET Tabs

266

IQS-8100 Series Transport Blazer

LOP OH TX/RX (SONET)

LOP OH TX/RX (SONET)

The LOP OH TX allows changing the low order path overhead information
to be transmitted while the LOP OH RX allows verification of the low order
path overhead information received.

Press TEST, LOP, and OH (under LOP TX/RX).

Path Overhead

³

Binary allows either displaying all overhead values in binary (when
enabled) or hexadecimal (when disabled). This setting is disabled by
default.

³

V5 (VT Path Overhead)

³

J2 (VT Path Trace). J2 is only available when Enable Trace from the
LOP TX (SONET) on page 257 is disabled.

³

Z6: VT Tandem Connection Monitoring

³

Z7: Extended signal label