EXFO IQS-8100 Series Transport Blazer for IQS-600 - Manual (Page 434)

Advanced Tabs
420 IQS-8100 Series Transport Blazer
Service Disruption Time (SDT) - Monitor
Analysis Tab
³
Port: Available with OC-n, STM-n, and OTU1/OTU2/OTU3 signal levels.
Refer to Port RX (Optical Interfaces) on page 150 for more information.
³
Errors/Alarms:
³
SDT Analysis: Available for each channel, indicates the pass/fail
verdict and the longest measured disruption time when enabled (see
SDT Threshold on page 419).
³
Path Signal Label (C2): Available for each high order path channel,
indicates the received Path Signal Label. Refer to Path Signal Label
(C2) on page 256 for more information.
³
Payload Type PSI[0]: Available for each ODU channel, indicates the
received payload type. Refer to OPU RX on page 203 for more
information.
Refer to
Section/Line Section RX (SONET) on page 219
Line RX (SONET) on page 228
STS-1 Channel HOP RX (SONET) on page 251
RS/MS Regenerator Section RX (SDH) on page 311
Multiplex Section RX (SDH) on page 320
AU-4 Channel HOP RX (SDH) on page 341
OTU OTU RX on page 163
ODU1/ODU2/ODU3 ODU RX on page 189
ODU0 Channel
ODU RX on page 189
OPU RX on page 203
GMP RX on page 209