EXFO IQS-8100 Series Transport Blazer for IQS-600 - Manual (Page 212)

OTN Tabs
198 IQS-8100 Series Transport Blazer
OPU TX
Note: Codes not listed in the previous table are reserved for future
standardization (Reserved For International Standardization).
Note: The Code field is automatically updated when the Injected payload Type is
changed and vice versa.
GFP Into Extended OPU2 09 0000 1001
OC-3/STM1 mapping inot ODU0 0A 0000 1010
OC-12/STM-4 into ODU0 0B 0000 1011
FC-100 into ODU0 0C 0000 1100
FC-200 into ODU1 0D 0000 1101
FC-400 into ODUflex 0E 0000 1110
FC-800 into ODUflex 0F 0000 1111
Bit Stream with Octet Timing 10 0001 0000
Bit Stream Without Octet Timing 11 0001 0001
ODU Multiplex with ODTUjk 20 0010 0000
ODU Muliplex with ODTUk.ts/ODTUjk 21 0010 0001
Not Available
b
55 0101 0101
Reserved Codes for Proprietary Use
c
80 1000 0000
NULL Test Signal FD 1111 1101
PRBS Test Signal FE 1111 1110
a. Selecting Reserved for International Standardization will use the hexadecimal code 00 but, all codes
not listed in the previous table at the exception of those cover in notes b and c are reserved for future
standardization.
b. Selecting Not Available will use the hexadecimal code 55 but, 66 and FF are also Not Available payload
types.
c. Selecting Reserved Proprietary will use the hexadecimal code 80 but, all codes from 80 to 8F are
reserved proprietary payload types.
Payload type Hex Code
MSB
1234
LSB
5678