beautypg.com

Vcat tx - overview, Group size, Lcas configuration – EXFO IQS-8100 Series Transport Blazer for IQS-600 User Manual

Page 473: Sq controls

background image

Next-Generation Tabs

SONET/SDH Application

459

VCAT TX - Overview

VCAT TX - Overview

Press TEST, VCAT, and Overview (under VCAT TX).

Group Size

Group Size indicates the type and size of the VCG members as well as the
bandwidth used by the VCG group. For example STS-1-21v =
145.152 Mbps
indicates STS-1 as the VCG type, 21v for the size, and
145.152 Mbps for the bandwidth of the VCG group.

LCAS Configuration

Enable LCAS allows enabling LCAS configuration. See LCAS - Source on
page 468 and LCAS Sink on page 481 for more information.

Note: Enable LCAS from TX and RX tabs are coupled.

SQ Controls

³

Apply SQ button: Validates and applies the SQ number for each
member. Available only when at least one SQ number has been
changed. Not available when Enable LCAS is enabled.

³

Resequence SQ button: Assigns SQ number sequentially following the
timeslot order. SQ number starts at 0. Not available when Enable LCAS
is enabled.