EXFO IQS-8100 Series Transport Blazer for IQS-600 - Manual (Page 148)

Summary Tabs
134 IQS-8100 Series Transport Blazer
Alarm Summary
³
Ethernet: Indicates the presence of any alarms/errors related to
Ethernet, Gb Ethernet, and 10G Ethernet testing such as Errors (FCS,
Jabber, Runt, Oversize when enabled (refer to Oversize Monitoring on
page 399), Undersize, Block Error, Out-of-sequence, or Frame Loss),
Link, and Fault. Refer to Ethernet Tabs on page 393 for more
information.
³
Pattern: Indicates the presence of any alarms/errors related to pattern
testing such as Bit Error, and Pattern Loss. Indicates also the Bit Error
rate and count for both Main (test port) and AUX ports. Refer to BERT
Tabs on page 405 for more information.
³
Client Offset: Indicates the presence of client frequency alarm as well
as the client frequency measurement value and its offset. Refer to
Client Offset RX on page 515 for more information.
³
Other: Indicates all other alarms/errors such as SDT. Refer to Service
Disruption Time (SDT) on page 411 for more information.