beautypg.com

Lop rx (sdh), Error analysis – EXFO IQS-8100 Series Transport Blazer for IQS-600 User Manual

Page 367

background image

SDH Tabs

SONET/SDH Application

353

LOP RX (SDH)

LOP RX (SDH)

Note: See LOP RX (SDH, TU-3 path) on page 364 for TU-3 path test case.

Press TEST, LOP, and Path (under LOP RX).

Error Analysis

³

BIP-2 (Bit-Interleave Parity - 2 bits): The BIP-2 error indicates a Low
Order Path parity error by performing a routine even-parity check over
all bytes of the previous VC frame.

³

LP-REI (Low Order Path Remote Error Indicator): The LP-REI error is
declared when bit 3 of the V5 byte is set to “1”.

Note: Refer to Alarm/Error Measurements on page 47 for H/C LEDs, Seconds,

Count, and Rate information.