EXFO IQS-8100 Series Transport Blazer for IQS-600 - Manual (Page 228)

SONET Tabs
214 IQS-8100 Series Transport Blazer
Section TX (SONET)
For Manual method:
³
Amount: Select the amount of manual error to be generated. Choices
are 1 through 50. The default setting is 1.
³
Send button: Press Send to manually generate error(s) according to
the Error Type and the Amount of Errors selected.
For Rate method:
³
Rate: Select the injection rate for the selected error. The rate must be
within the minimum and maximum values specified.
³
Continuous: Generates the selected error to its theoretical maximum
rate when the Continuous check box is selected. The Continuous
check box is cleared by default.
³
On/Off button: The On/Off button is used to activate/deactivate the
selected error at the rate specified or at its theoretical maximum rate
when the Continuous check box is selected. This setting is disabled
(Off) by default.