beautypg.com

Fdl tx, Configuration – EXFO IQS-8100 Series Transport Blazer for IQS-600 User Manual

Page 294

background image

DSn Tabs

280

IQS-8100 Series Transport Blazer

FDL TX

FDL TX

Press TEST, DSn-PDH, and FDL (under DSn-PDH TX).

Note: FDL TX is only available for DS1 interface with ESF framing. For Dual RX

test, FDL is only available for the primary DS1 TX/RX port.

The FDL TX tab is used to set and configure the Bit-Oriented Messages
(BOM) of the Extended Super-Frame (ESF).

Configuration

Enable FDL: Allows the activation of the Facility Data Link testing. This
setting is disabled (Off) by default unless otherwise set during the test
setup.