EXFO IQS-8100 Series Transport Blazer for IQS-600 - Manual (Page 490)

Next-Generation Tabs
476 IQS-8100 Series Transport Blazer
LCAS - Source
³
CTRL
CTRL: Indicates the Control value for each VCG member.
Overwrite Enable: Allows overwriting the Control. The CTRL value of
each member having the Overwrite Enable checked can be
overwritten. Click on a specific member CTRL value and select a new
value from the list. Possible values are listed below. The value(s)
changed will only take effect when the Apply Overwrite Value(s)
button is pressed.
³
Generated: The Control value generated by the state machine.
³
Enable All: Allows enabling the CTRL overwrite for all members.
³
Apply Overwrite Value(s): Allows applying the new overwrite value(s)
for both SQ and CTRL.
CTRL Description CTRL Description
ADD (0001) The member is about to be added to
the group
Reserved (0111) Reserved
NORM (0010) Normal transmission Reserved (1000) Reserved
EOS (0011) End of Sequence indication and
Normal transmission
Reserved (1001) Reserved
IDLE (0101) The member is not part of the group or
about to be removed
Reserved (1010) Reserved
DNU (1111) Do Not Use the payload, the Sink side
reported FAIL status
Reserved (1011) Reserved
FIXED (0000) This is an indication that this end uses
fixed bandwidth (non-LCAS mode)
Reserved (1100) Reserved
Reserved (0100) Reserved Reserved (1101) Reserved
Reserved (0110) Reserved Reserved (1110) Reserved